Filter
Top Products
EFP9800 ESC/POS Commands
3255 4073– 002 6– 47
Note: When the Enable/Disable Automatic Status Back (ASB) command is
enabled, the status transmitted by ASB and by this command must be
distinguished.
Transmit Printer ID
Transmits the printer’s ID to the host computer.
Hexadecimal Decimal ASCII Value of n
1D 49 n 29 73 n GS I n 1-3
The following table shows the printer ID as specified by n.
n Printer ID Specification ID
1 Model ID Unisys EFP9800 0A (Hex)
2 Type ID See the next table
3 ROM Version Indicates the version of ROM
installed
Type ID (from previous table); n = 2
Type ID Status
Bit Function 0 1
0 Two-Byte Code
Correspondence
Always 0
No correspondence
Correspondence
1 Not Used Always 0
2 DSW2-1 Setting Off On
3 Undefined
4 Not Used Always 0
5-6 Undefined
7 Not Used Always 0