Filter
Top Products
EFP9800 ESC/POS Commands
6– 6 3255 4073– 002
Eject Slip
Prints the data in the buffer and ejects the slip.
Hexadecimal Decimal ASCII
0C 12 FF
Standard Mode
• Enabled only when slip is selected for printing.
• Slip is ejected to the length set by the Set Slip Eject Length command (1B
43). If this length is not set, the slip is completely ejected.
• Receipt or journal paper from the paper roll is not ejected even if it is also
selected.
• After the slip is ejected, the receipt or journal paper is selected for printing.
• Slips are ejected forward only.
Page Mode
The processed data is printed and the printer returns to standard mode. The
developed data is deleted after being printed. For more information see “ Page
Mode” later in this section.
Carriage Return
Hexadecimal Decimal ASCII
0D 13 CR
Standard Mode
Prints one line and sets the print starting position to the beginning of the line.
Does not feed the paper.
Page Mode
Sets the print starting position to the beginning of the line. For more
information see “Page Mode” later in this section.