Filter
Top Products
Ithaca Peripherals Proprinter Emulation Commands
3255 4073–002 7–15
Set Superscript
Starts superscript printing. (Superscript characters print above the normal print
line.) The Set Superscript command must be sent before the characters to be
printed in superscript.
To return to printing on the normal print line, use the Cancel Superscript (1B
54) command.
Hexadecimal Decimal ASCII
1B 53 30 27 83 48 ESC S 0
Set Subscript
Starts subscript printing. (Subscript prints characters below the normal print
line.) The Set Subscript command must be sent before the characters to be
printed in subscript.
To return to printing on the normal print line, use the Cancel Subscript
command (1B 54).
Hexadecimal Decimal ASCII
1B 53 31 27 83 49 ESC S 1
Cancel Subscript/Superscript
Stops subscript/superscript printing. Characters are printed on the normal print
line at the normal height.
Hexadecimal Decimal ASCII
1B 54 27 84 ESC T
Cancel Double-Wide for Current Font
Cancels double-wide characters set by any command that sets double-wide
characters.
Hexadecimal Decimal ASCII
1B 57 30 27 87 1 ESC w 0