Filter
Top Products
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
5-8 Virtual Private Networking Using IPsec
v1.2, June 2008
Creating a VPN Tunnel Connection to a VPN Client
You can set up multiple remote VPN Client policies through the VPN Wizard by changing the
default End Point Information settings created for each policy by the wizard. A remote client
policy can support up to 200 clients. The remote clients must configure the “Local Identity” field
in their policy as “fvs_remote.com”.
To configure the VPN client:
1. Select VPN > VPN Wizard from the main menu. The VPN Wizard screen is displayed.
2. Select VPN Client as your VPN tunnel connection. The wizard needs to know whether you
are planning to connect to a remote gateway or setting up the connection for a remote client
PC to establish a secure connection to this device.
3. Create a Connection Name. Enter an appropriate name for the connection. This name is not
supplied to the remote VPN client. It is used to help you manage the VPN settings.
4. Enter a Pre-shared Key. The key must be entered both here and on the remote VPN gateway,
or the remote VPN Client. This key length should be minimum 8 characters and should not
exceed 49 characters. This method does not require using a CA (Certificate Authority).
Figure 5-6