Filter
Top Products
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
9-6 Monitoring System Performance
v1.2, June 2008
8. Enter a Schedule for sending the logs. From the Unit pull-down menu, choose: Never, Hourly,
Daily, or Weekly. Then set the Day and Time fields that correspond to your selection.
9. You can configure the firewall to send system logs to an external PC that is running a syslog
logging program. Click Yes to enable SysLogs and send messages to the syslog server, then:
a. Enter your SysLog Server IP address
b. Select the appropriate syslog facility from the SysLog Facility pull-down menu. The
SysLog Facility levels of severity are described in the table below.
10. Click Apply to save your settings.
Viewing Firewall Logs
To view the Firewall logs:
1. Select Monitoring > Firewall Logs & E-mail from the main menu. The Firewall Logs & E-
mail screen displays
2. Click the View Log link in the upper right-hand section of the screen. The Logs screen is
displayed.
3. If the E-mail Logs options as been enabled, you can send a copy of the log by clicking Send
Log.
4. Click Refresh Log to retrieve the latest update; click Clear Log to delete all entries.
Numerical Code Severity
0 Emergency: System is unusable
1 Alert: Action must be taken immediately
2 Critical: Critical conditions
3 Error: Error conditions
4 Warning: Warning conditions
5 Notice: Normal but significant conditions
6 Informational: Informational messages
7 Debug: Debug level messages