Filter
Top Products
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Virtual Private Networking Using IPsec 5-25
v1.2, June 2008
.
5. Enter a descriptive Record Name such as “Sales”.
6. Assign at least one range of IP Pool addresses in the First IP Pool field to give to remote VPN
clients.
7. If you have a WINS Server on your local network, enter its IP address.
8. Enter one or two DNS Server IP addresses to be used by remote VPN clients.
9. If you enable Perfect Forward Secrecy (PFS), choose DH Group 1 or 2. This setting must
match exactly the configuration of the remote VPN client,
10. Specify the Local IP Subnet to which the remote client will have access. Typically, this is your
VPN firewall’s LAN subnet, such as 192.168.2.1/255.255.255.0. (If not specified, it will
default to the LAN subnet of the VPN firewall.)
Figure 5-15
Note: The IP Pool should not be within your local network IP addresses. Use a
different range of private IP addresses such as 172.20.xx.xx.