Filter
Top Products
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Managing Users, Authentication, and Certificates 7-7
v1.2, June 2008
To restrict logging in based on IP address:
1. Select the by Source IP Address tab. The by Source IP Address screen will display.
2. In the Defined Addresses Status section, select:
•the Deny Login from Defined Addresses to deny logging in from the IP addresses that
you will specify
•the Allow Login only from Defined Addresses to allow logging in from the IP addresses
that you will specify.
3. Click Apply.
4. To specify a single IP address, select IP Address from the Source Address Type pull-down
menu and enter the IP address in the Network Address/IP address field.
5. To specify a subnet of IP addresses, select IP Network from the Source Address Type pull-
down menu. Enter the network address and netmask length in the Network Address/IP
address field.
6. Click Add to move the defined address to the Defined Addresses table.
7. Repeat these steps to add additional addresses or subnets.
Figure 7-7