Filter
Top Products
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
4-10 Firewall Protection and Content Filtering
v1.2, June 2008
1. Click Add under the Outbound Services Table. The Add LAN WAN Outbound Service
screen is displayed...
2. Configure the parameters based on the descriptions in Table 4-1 on page 4-3.
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Outbound Services table.
Creating a LAN WAN Inbound Services Rule
This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that
allowing inbound services opens holes in your firewall. Only enable those ports that are necessary
for your network.
To create a new inbound service rule in the LAN WAN Rules tab:
1. Click Add under the Inbound Services Table. The Add LAN WAN Inbound Service screen is
displayed.
Figure 4-2