Filter
Top Products
ORBITER
Use this to set the picture shift.
Example: Setting ”ORBITER” to “AUTO1”
Perform Steps 1-2 of PIXL PROTECT, then...
3. Use the and buttons to select “ORBITER”
(relates to above).
4. Use the and buttons to select “AUTO1”. The mode switches
as follows each time the or button is pressed:
OFF AUTO1 AUTO2 MANUAL
53
OSD (On Screen Display) Controls
Information
■ LUM. SETTING
AUTO .................... The brightness of the screen is adjusted
automatically to suit the picture quality.
SET. 1, 2, 3 .... Sets maximum brightness. The brightness
level decreases in the order of SET. 1, 2, 3.
SET. 3 provides minimum brightness.
Information
■ ORBITER settings
OFF ................ Orbiter mode does not function.
AUTO1............ The picture moves around the screen
intermittently, making the picture smaller.
AUTO2 ........... The picture moves around the screen
intermittently, making the picture bigger.
MANUAL ....... Use can adjust the orbiter function
(H-Dot, V-Line and Time) manually.
See the following explanation.
LUM. SETTING : SET. 1
ORBITER : OFF
INVERSE : OFF
IMAGE SWEEP : OFF
SOFTEN : OFF
PIXL PROTECT
SEL. ADJ. EXIT
EXIT
LUM. SETTING : AUTO
ORBITER : AUTO1
INVERSE : OFF
IMAGE SWEEP : OFF
SOFTEN : OFF
PIXL PROTECT
SEL. ADJ. EXIT
EXIT