Filter
Top Products
64
The mode switches as follows each time the or buttons is
pressed:
The available sources depend on the setting of “BNC INPUT”.
RGB: → LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←
→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←
COMP: → LAST↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←
→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ←
4. Once the setting is completed ...
Press the EXIT button to return to the main menu. To delete the
main menu, press the EXIT button once more.
Enabling/disabling the front panel controls
This function enables/disables the front panel controls.
Example: Setting “ON”
Perform the following operations.
Press the MENU button on the remote control to display the
MAIN MENU on the screen, then...
1. Use the and buttons to select “SETTING 3”, then press
the MENU button. The “SETTING 3” screen appears.
2. Use the and buttons to select “CONTROL LOCK”.
OSD (On Screen Display) Controls
TIMER
INPUT SELECT : VIDEO2
CONTROL LOCK : OFF
IR ENABLE : ON
LOOP OUT : OFF
ID NUMBER : ALL
VIDEO WALL
SETTING 3 3 / 3
PREVIOUS PG.
SEL. ADJ. EXIT
EXIT
Information
■ INPUT SELECT settings
LAST ................... Last mode (the mode that was last selected at
the time the power was switched off).
VIDEO 1, 2, 3 ...... VIDEO input mode.
RGB 1, 2, 3 .......... RGB input mode.
HD 1, 2 ................. HD/DVD input mode.
■ Restoring the factory default settings
Select “FACTORY” under the SETTING 1 menu.
Note that this also restores other settings to the factory defaults.