Filter
Top Products
Contents Index
Contents
6
Index
6
UNPACKING YOUR CINTIQ
Your Cintiq interactive pen display comes pre-assembled with the pen display mounted on the Cintiq
display stand. The product parts and accessories are packed together in the accessories box. To avoid
damage, see the instructions on the following pages before setting up and using Cintiq.
Unpacking your product
Box contents
UNPACKING YOUR PRODUCT
Carefully unpack and place all items on a stable surface.
1. Open the box cover
. Lift away the accessory parts box. Move the cabling and lift away the upper
cushion. Remove any packing materials from around the interactive pen display and stand.
To better access Cintiq, remove the plastic joiners from the lower corners of the product box. Then lift
away the upper portion of the box.
2. Lock the display in place
.
• Locate the incline levers on each
side of the unit. Grasp the pen
display on both sides at
approximately the same height as
the levers.
• Use your fingertips to gently
squeeze the upper levers. As you
squeeze, gently rotate and lift the
pen display upward. The display
support arms will follow your
movement. Continue to rotate
the pen display to a vertical
position until the support arms
lock into place. When in a vertical
position, release the incline
levers.
• Next, use the incline levers to
rotate the display to a flat
position.