Filter
Top Products
Contents Index
Contents
73
Index
73
TESTING THE EXPRESSKEYS
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test each ExpressKey.
Be sure to select the Cintiq unit you are testing from the T
ABLET INFO column.
2. Test the keys by pressing them one at a time. Each time you press a key, its number is shown next to
either the L
EFT BUTTONS or RIGHT BUTTONS category, depending on which keys group you are testing.
3. When you are done, click the
CLOSE button to exit the dialog box.
Important: Some applications can override and control the ExpressKey functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the ExpressKeys.
For details, see using applications integrated for tablet control
.
TESTING THE TOUCH RINGS
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test each Touch Ring.
Be sure to select the Cintiq unit you are testing from the T
ABLET INFO column.
2. Slide your finger around the entire circumference of each Touch Ring. A number is shown next to either
the L
EFT TOUCH or RIGHT TOUCH category, depending on which Touch Ring you are testing.
3. Press the Touch Ring mode buttons. Status LEDs show the active mode. As you press each button, an
overlay will appear briefly on your display screen to show the button function assignments. Within the
D
IAGNOSTICS dialog box, the button number is shown next to either the LEFT BUTTONS or RIGHT BUTTONS
category, depending on which buttons group you are testing.
4. When you are done, click on the C
LOSE button to exit the dialog box.
Important: Some applications can override and control the Touch Ring functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the Touch Ring.
For details, see using applications integrated for tablet control
.