Filter
Top Products
CHAPTER 2: Preparation, Installation, and Connection
24 MUVPN Client
21 From the Virtual Adapter drop list, verify that Disabled has been
selected.
22 From the Network Security Policy expand Security Policy, then
expand Key Exchange (Phase 2).
My Identity and Security Policy should appear below New Connection.
23 Select Proposal 1.
My Identity and Security Policy should appear below New Connection.
24 Verify that the Encapsulation Protocol (ESP) check box is enabled.
25 Set the Encrypt Alg and Hash Alg drop lists to the same values
configured on the SOHO 6.
The “Hash Alg” setting refers to the “Authentication Algorithm” and the
“Encrypt Alg” setting refers to the “Encryption Algorithm” settings on the SOHO
6. In our example, Triple DES and MD5.
N
OTE
These two setting
must
exactly match those on the SOHO 6 or the
connection will fail.