A SERVICE OF

logo

User Guide 29
Reboot the SOHO 6
the default IP address, go to: http://192.168.111.1. Click
Reboot.
Unplug the SOHO 6 and reconnect it to a power source.
To reboot a SOHO 6 located on a remote system, you must set the
SOHO 6 to allow either incoming HTTP (Web) or FTP traffic to the
trusted address of the SOHO 6. For information on configuring a
SOHO 6 to allow incoming traffic, see “Configure Incoming and
Outgoing Services” on page 62.
You then use one of these methods:
With your Web browser, go to the System Status page using
the external IP address of the SOHO 6. Click Reboot.
Send an FTP command to the remote SOHO 6. Use an FTP
application to connect to the SOHO 6, then enter the
command:
quote rebt