Xerox 180 NPS Printer User Manual


 
SUPPLIES
A-12 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
Other supplies
This section describes the supplies other than paper that are
necessary for installation and afterward. Your sales representative
will help you place your initial supply order.
Dry ink
Dry ink (also called toner) is the black powder which forms the image
on the printed page. There are three cartridges of dry ink in each
carton. You should keep at least one extra cartridge on hand at all
times. The disposable cartridges are easily changed with no mess.
The consumption rate of Xerox dry ink is approximately one cartridge
per 60,000 pages. Use only dry ink that is specified for use in the 96,
4635, or 180 printer, as described in the consumable supplies table.
MICR dry ink MICR dry ink is the magnetic black powder which forms the image on
the printed MICR document. There are three cartridges of MICR dry
ink in each carton. The consumption rate of Xerox MICR dry ink is
approximately one cartridge per 60,000 pages. Use only MICR dry
ink in your 96/4635/180 MICR printer.
The dry ink used with the 96/4635/180 MICR system is designed for
MICR printing and does not function well when used in non-MICR
systems. The same procedure used for non-MICR printing systems
is used to add the dry ink to the 96/4635/180 MICR printer.
Note: Dry ink (toner) yields are based on 7% area coverage. Your
yield may vary, depending on coverage.
Caution: Use only MICR dry ink in the 96/4635/180 MICR printer.
Do not use standard dry ink. MICR dry ink cannot be reused.
Fuser agent
Fuser agent (the lubricant for the printer fuser) is a consumable item
required by the 96/4635/180 printers. You should keep at least two
boxes (each box contains one bottle) on hand for installation by the
service representative. The consumption rate of Xerox fuser agent is
approximately one bottle per 250,000 pages. For product
information, refer to the consumable supplies table in this appendix.
Developer
Developer is not consumed by the printer but does have an effective
life of approximately 1,000,000 pages per carton (600,000 per carton
for MICR developer). Both kinds of developer are guaranteed by
Xerox for 600,000 pages per carton. Developer is a required item and
must be kept on hand.