Filter
Top Products
PRINTER SPECIFICATIONS AND REQUIREMENTS
6-14 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
Service access The following figure provides space planning information and service
access requirements for the bypass transport from a top view.
Figure 6-8. Bypass transport space planning diagram
1 Recommended third-party feeder hardware attaches at
rear of 96/4635/180 printer.
2 Expected third-party input paper feed path
3 Neutral area, to remain unoccupied
4 Shaded areas at rear and right side of the bypass transport
require third-party input/output devices to be undockable
from the feeder/stacker or the bypass transport.
5 Register edge of the output sheet
6 Third-party hardware must not extend more than 1 inch / 25
mm beyond bypass transport front cover line for correct
front door access.
7 Bypass transport / input enablement jam clearance space
is required.