Filter
Top Products
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 2-1
2. 2Controller components and
options
The printer controller provides the printer with print data and
commands, and receives status information from the printer. This
chapter describes the components and options available for the
controller.
Controller hardware
The DocuPrint 96/4635/180 NPS and 96/4635/180 MICR NPS
printer controller hardware typically consists of the following
components and features:
Your controller may be either a Sun Ultra 2 or Ultra 60 workstation.
The following sections contain information about both the Ultra 2 and
the Ultra 60.
Sun Ultra 2 workstation
The Sun workstation provides a user interface to the print engine. It
is used to operate the NPS software that controls the printer. The
workstation contains the following hardware components:
• Sun Ultra 2 workstation processor (system unit)
• Display monitor
• Keyboard and mouse
• Connectivity boards for Ethernet and, optionally, Token Ring
• A Data Control Interface Module (DCIM2) card installed in the
processor to interface with the print engine.