Filter
Top Products
PRINTER SPECIFICATIONS AND REQUIREMENTS
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 6-29
Printer hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
For a summary of controller hardware specifications and
requirements, refer to the “Controller specifications and
requirements” chapter of this guide. Contact your service
representative if you have questions not specifically addressed in this
guide.
Table 6-12.Printer specifications and power requirements—96/
4635/180
Device
Dimensions (depth,
width, height) Weight
Heat
dissipation Power requirements
96 printer:
Inverter feeder /
stacker only
d=38.8 in. / 98.6 cm
w=119 in./ 302.3 cm
h= 59.6 in. / 151.3 cm
Total space
required (+ access):
191 in. w by
114 in. d /
567 cm w by
290.3 cm d
1925 lbs. /
874 kg
Operating:
28,140
BTU per
hour
Standby:
4,454
BTU per
hour
60 Hz:
120/208 VAC
(182 V to 220 V),
KVA 7.3 (operating)
Power cord: 50 amp,
NEMA 14-50R
50 Hz:
Consult your
local service
representative.
96/4635/180
printer:
Inverter feeder /
stacker + feeder /
stacker
d=38.8 in. / 98.6 cm
w=151.2 in./ 384 cm
h= 59.6 in. / 151.3 cm
Total space
required (+ access):
223.25 in. w by
114 in. d /
567 cm w by
290.3 cm d
2,588 lbs. /
1,174.9 kg
96/4635:
Operating:
28,140
BTU per
hour
Standby:
4,454
BTU per
hour
Energy
Saver: 2,700
BTU per
hour
180:
Operating:
32,770
BTU per
hour
Standby:
4,454
BTU per
hour
Energy
Saver: 2,700
BTU per
hour
60 Hz:
96/4635:
120/240 VAC or
120/208 VAC;
50 amp service;
NEMA L14-50R;
KVA 7.3 (operating)
180:
120/208 VAC
(182 V to 220 V),
KVA 7.3 (operating)
Cord 1: 50 amp,
NEMA 14-50R
Cord 2: 30 amp,
NEMA 14-30R
50 Hz:
Consult your
local service
representative.