Xerox 2060 Copier User Manual


 
Printer specifications and requirements
6-18 Installation Planning Guide
Printer hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
For a summary of controller specifications and requirements,
refer to the “Controller specifications and requirements” chapter
of this guide. Contact your service representative if you have
questions not specifically addressed in this guide.
Table 6-6. Printer specifications and power requirements
Device
Dimensions
(width, depth,
height)
Total
Weight Heat dissipation
Power
requirement
s
Printer with standard
(three-tray) feeder
w=92.3”/ 2380 mm
d=37.x”/ 950 mm
h=55.6”/ 1412 mm
Minimum space
required:
w=154.5” /3905 mm
d=125” /3167 mm
1874.25
lbs./ 850
kg.
60 Hz and 50 Hz:
Operating: 12,300
BTU per hour
Standby: 7,936 BTU
per hour
60 Hz and 50
Hz:
4.8 KVA max.
(operating
mode)
Tray 4 (high-capacity
feeder, or HCF)
w=48.07”/ 1221 mm
d=29.53”/ 750 mm
h=55.6”/ 1412 mm
Minimum space
required when
attached to printer:
w=192.5” / 4870
mm
d=125” / 3167 mm
425 lbs./
192.95 kg
60 Hz and 50 Hz:
Operating: 5,100 BTU
per hour
Standby: 5,100 BTU
per hour
60 Hz and 50
Hz:
1.5 KVA max.
(operating
mode)
High-Capacity Stacker
(HCS)
w=45.28”/ 1150 mm
d=26.77”/ 680 mm
h=43.70”/ 1100 mm
Minimum space
required when
attached to printer:
w=183.3” / 4643
mm
d=125” / 3167 mm
342 lbs./
155 kg
60 Hz and 50 Hz:
Operating: 4,700 BTU
per hour
Standby: 550 BTU per
hour
60 Hz and 50
Hz:
1.5 KVA max.
(operating
mode)
High-Capacity Stacker
Stapler (HCSS)
w=35.2”/ 895 mm
d=24”/ 600 mm
Minimum space
required when
attached to printer:
w=183.3” / 4643
mm
d=125” / 3167 mm
60 Hz and 50
Hz:
1.5 KVA max.
(operating
mode)