Xerox 2060 Copier User Manual


 
Defining the printer to the host: TCP/IP attachment
F-6 Installation Planning Guide
One DEVICE statement for each functional subsystem
application (FSA) under control of the FSS.
The following table lists the JES3 FSS statement parameters
to be defined.
Table F-3. JES3 FSS statement parameters
Item
description Default
Source of
value
Range of
acceptable
values Comments
Your
value
FSSDEF parameters
FSSNAME None Installation
preferences
1 to 8-character
alphanumeric
string
Specifies name of the
FSS. (Required
parameter)
MSGDEST JES Installation
preferences
JES or a
destination class
name
Specifies the console
destination class for
FSS messages.
PNAME None Name of the
FSS
procedure
1 to 8-character
alphanumeric
string
Specifies the
procedure for starting
this FSS. (Different
FSSDEF statements
may refer to same
procedure.)
SYSTEM Same as
specified in
JUNIT
parameter
of DEVICE
statement
System ID of
system the
FSS is to run
on.
Valid system ID
name
Can also be specified
as QUEUE=
TERM NO Installation
preferences
YES or NO YES specifies FSS
terminates if JES3
global address space
is terminated.
TYPE TYPE=WTR
must be
specified
WTR Specifies FSS is an
output writer.
TYPE=WTR must be
specified.
DEVICE parameters
BURST YES Installation
preferences
YES or NO
,M
,M specifies
MARKFORM, which
causes printer to
offset-stack or stitch
jobs, subject to
printer’s setting and the
COPYMARK
parameter.