Filter
Top Products
Controller specifications and requirements
5-6 Installation Planning Guide
Controller hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your DocuColor NPS/IPS printer controller
hardware components.
For a summary of printer hardware specifications and
requirements, refer to the “Printer specifications and
requirements” chapter of this guide. Contact your service
representative if you have questions not specifically addressed in
this guide.
Table 5-2. DocuColor NPS/IPS printer controller specifications and power
requirements
Device
Dimensions (depth,
width, height) Weight
Heat
dissipation Power requirements Cable lengths
Processor d=25 in. / 63.5 cm
w=10 in. / 25.4 cm
h=17.75 in. / 45.1 cm
70 lbs. /
31.8 kgs
1,100 BTU
per hour
60 Hz:
100 to 240 VAC,
15 amp, 0.4 KVA,
5-15 NEMA
50 Hz:
100 to 240 VAC,
15 amp, 0.4 KVA
Power: 8 ft. /
2.4 m
Interface to
printer:
20 ft. / 6.1 m
usable length
Monitor d=10 in. / 25.4 cm
w=17.5 in. / 44.5 cm
h=18.5 in. / 47 cm
18 lbs. /
8.2 kg
408 BTU
per hour
100-120 ~ VAC,
1 phase, 50-60 Hz,
3.0 amp, 0.4 KVA
200-240 ~ VAC,
1 phase, 50-60 Hz,
2.0 amp, 0.4 KVA
Video cable to
processor:
46 in. / 1.17 m
4 mm
cartridge
tape drive
d=12.25 in. / 31 cm
w=7.5 in. / 19 cm
h=2.75 in. / 7 cm
8 lbs. /
6.6 kg
--- 100-120/200-240 VAC,
0.8/0.4 amp, 47-63 Hz
SCSI cable to
processor or
additional SCSI
device:
28 in. / 71 cm
Keyboard d=7.5 in. / 19.1 cm
w=20 in. / 50.8 cm
2 lbs. /
1kg
--- --- 72 in. / 1.8 m
Mouse d=3 in. / 8 cm
w=4 in. / 10 cm
h=2 in. / 5 cm
0.3 lbs. /
0.14 kg
--- --- 25 in. / 63 cm