Filter
Top Products
Controller specifications and requirements
Installation Planning Guide 5-5
Figure 5-2. Sun Blade 1000 fan and vent locations to keep
clear
1. Vents inside the processor
2. Vents in front and back of processor
Do not:
• Do not place the controller monitor on top of the processor.
• Do not allow any piece of equipment to blow warm air into the
air intake vents of the processor.
• Do not place the processor on its side, or in any other
position but the upright, vertical position.
• Do not place the processor or monitor on top of the printer.
1
2
2
2