Xerox 2060 Copier User Manual


 
Installation
8-2 Installation Planning Guide
4. Xerox personnel downloads Xerox client software, or installs
drivers or PPD files if applicable, on one client workstation to
validate the installation (15 minutes). Software may be
installed on another client workstation as part of training
conducted by your systems analyst. All other client software
installations are your responsibility. Refer to the
Guide to
Submitting Jobs from the Client
for more information.
If your site uses third-party Transmission Control Protocol/
Internet Protocol (TCP/IP) lpr networking software, refer to
the
Xerox DocuColor 2060 NPS/IPS Guide to Configuring
and Managing the System
for information on modifying the
printcap file.
5. Xerox personnel tests the system and runs sample jobs (30
minutes).
6. Xerox personnel conducts initial operations training (2 to 4
hours).
7. Xerox personnel reviews preventive maintenance schedules
and service call procedures.
Your responsibilities
Xerox is responsible for the physical installation of the printer
components and for loading the software and applications. You
have the general site responsibility of ensuring that the right
personnel, supplies, and network information are available.
At the time of installation, you should do the following:
Make sure that your system administrator is available during
the loading of software.
For software loading purposes, be prepared to provide Xerox
personnel with network information from the preinstallation
checklist. Refer to the “Setting up the work area” chapter of
this guide for specifics regarding network information.
Check the documentation and software kits with their packing
lists for completeness.
Have your operators available for training.