Xerox 2060 Copier User Manual


 
Preparing for installation
4-12 Installation Planning Guide
NPS/IPS as a remote printer (RPRINTER)
Provide the following information to the service representative if
you configure DocuColor 2060 NPS/IPS as a remote printer on
the Novell network (for further information, refer to the
“Installation process” section in the “Installation” chapter of this
guide):
Novell print server name—indicates the name of the print
server to which the DocuColor 2060 NPS/IPS will connect.
An advertising print server with this name must be running on
the Novell internet.
Printer name(s) to service—refers to the name(s) of the
printers defined for the Novell print server. Virtual printers
should be defined with these names after DocuColor 2060
NPS/IPS installation is complete. These printers should be
defined as type Remote Other/Unknown.
IPX internal
network number
Specify the network number for the internal IPX network in the
DocuColor 2060 NPS/IPS server. This number must be globally
unique within the NetWare internet to which the DocuColor 2060
NPS/IPS is connected. (Do not assign a number that is used by
other machines to which the DocuColor 2060 NPS/IPS will be
connected.)
LAN network
number
Specify the network number for the cabling system to which the
DocuColor 2060 NPS/IPS is connected, for example the
Ethernet or Token Ring segment.
Network framing
type
Specify the network framing type used for IPX/SPX
communication by DocuColor 2060 NPS/IPS. There are eight
options:
ETHERNET__II
ETHERNET__802.3
ETHERNET__802.2
ETHERNET__SNAP
TOKENRING
TOKENRING__SNAP
FDDI
FDDI__SNAP.