Filter
Top Products
TCP/IP
Xerox WorkCentre 4260 Series System Administration Guide 19
DNSv6
14. Enter a valid [IPv6 Domain Name].
15. Enter an IP address for the [Primary DNSv6 Server Address]. Enter an IP address for
[Secondary DNSv6 Server Address].
16. Check the box to enable [Dynamic DNSv6 Registration].
NOTE: If your DNS Server does not support dynamic updates there is no need to enable
DDNS.
17. Click on the [Add] button to add your address.
18. Scroll down the page and click on the [Apply] button to save the changes.
Test Access
1. At your Workstation, open the Web browser, In the TCP/IP Address bar, enter “http://”
followed by the Internet address of the machine. Then press the <Enter> key on the
keyboard.
If you use the domain name to specify the machine, use the following format.
http://myhost.example.com
If you use the IP address to specify the machine, use one of the following formats
depending on your machine configuration. The IPv6 format is supported on Windows
Vista only. An IPv6 address needs to be enclosed in square brackets.
IPv4: http://xxx.xxx.xxx.xxx
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]
NOTE: If you have changed the port number from the default port number “80”, append
the number to the Internet address as follows. In the following examples, the port number
is 8080.
Domain name: http://myhost.example.com:8080
IPv4: http://xxx.xxx.xxx.xxx:8080
IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:8080
2. Verify that the home page of CentreWare Internet Services is displayed.
The CentreWare Internet Services installation process is now completed.
NOTE: If the Accounting feature is enabled, you may be required to enter a user ID and
passcode (if one is set up).
NOTE: When your access to CentreWare Internet Services is encrypted, enter “https://”
followed by the Internet address, instead of “http://”.
• Automatically Configured Gateway Address – Displays the automatically configured
gateway address.
Domain Name:
• Domain Name – Enter the domain name.