Filter
Top Products
Printer Settings that Affect Memory
3-68
❖
4505/4505ps or 4510/4510ps User’s Guide
Jam Recovery
PCL Menu
(page 3-26)
PostScript Menu
(page 3-35)
A paper jam may cause a page image being printed to become lost. When
Jam Recovery
is
On
, the printer will automatically reprint the image of the
jammed page, after the jam has been cleared.
Because the printer holds a page image in memory longer with
Jam
Recovery
, if a low memory condition occurs there can be a slight
performance impact and the printer may require more memory. If sufficient
memory exists,
Jam Recovery
has no impact.
Resolution
PCL Menu
(page 3-27)
PostScript Menu
(page 3-35)
The printer prints at 600 or 300 dpi. The factory setting is 600 dpi.
Your software application may be able to set
Resolution
and override the
setting here. Whether a new
Resolution
is set by your application or on
the Control Panel, the new
Resolution
becomes effective with the next
print job or with a printer reset. Unless
State Saving
(page 3-28 for PCL,
page 3-36 for PostScript, and page 3-68) is
On
, downloaded fonts and
macros may be cleared from memory.
The higher the resolution, the more memory required. See
Figure 3.26
(page 3-69)
for memory requirements.
State Saving
PCL Menu
(page 3-28)
PostScript Menu
(page 3-36)
When
State Saving
is
Off
, fonts and printer macros permanently
downloaded from your software application are cleared from memory
when:
• The printer switches from one page description language (PDL) to
another (such as from PostScript to PCL).
• A memory reconfiguration takes place (such as for a new
Page
Protection
or
Resolution
setting).
When
State Saving
is
On
, the printer reserves memory to retain the
downloaded fonts and macros. Thus, the fonts and macros do not have to
be downloaded to memory again when switching PDLs or reconfiguring
memory.
You may set
State Saving
separately for the PCL and the PostScript
environments.
The printer requires 10 MB of memory to enable State Saving when
PostScript is installed. If PostScript is not installed, State Saving may be
enabled with 6 MB of memory.
Figure 3.25 PCL and PostScript Menu options that affect printing speed and memory usage
Option
Description
AUG-CH03 Page 68 Black,Red,Cyan Friday, February 3, 1995 12:22 AM