Filter
Top Products
Displayed Control Panel Messages
7-14
❖
4505/4505ps or 4510/4510ps User’s Guide
Std. Tray Empty
The standard tray does not contain paper.
ACTION: Add paper to the standard tray.
Std. Tray Out
The standard tray has been removed or is not properly inserted.
ACTION: Insert the standard tray.
Temp Font/Macro
The printer was busy processing PCL data from a host system but the job was not
completed since temporary fonts and macros were not deleted. The last page
timeout has expired.
This message appears until:
• Another print job is received.
• The
Port Timeout
expires and
Auto Job End
is
On
. See
Chapter 3: Using the
Control Panel
,
“Interface Menu” (page 3-37)
.
ACTION: None
Test Print
Printing...
A Test Print is being printed (for use by service technicians).
The message clears once the printing is completed.
ACTION: None
Token Ring Fail
The Token Ring card (XNIC-T’RING) has failed and cannot be used.
ACTION: Press
Enter
to allow the printer to continue as if the Token Ring
card were not installed. This error is not subject to
Auto Continue
(page 3-59).
Print a Configuration Sheet. If the sheet does not show Token Ring as present,
contact your dealer or Xerox / Rank Xerox.
Toner Low
Toner is getting low in the EP cartridge, but printing will continue without
interruption.
ACTION: Replace the EP cartridge as soon as possible.
Turn Power Off
Then On
A fatal error has occurred.
ACTION: Power OFF [0], then ON [1].
Upper Card Err
Power Off & On
Upper font card was removed while the printer was online.
ACTION: Power OFF [0] the printer, then power it ON [1] to resume normal
operations.
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
AUG-CH07 Page 14 Black,Cyan Friday, February 3, 1995 12:34 AM