Filter
Top Products
PostScript Menu
3-34
❖
4505/4505ps or 4510/4510ps User’s Guide
Manual Size
Legal (8.5x14)
Folio (8.5x13)
Letter (8.5x11)*
(USA)
A4 (210x297)*
(Europe)
Exec (7.25x10.5)
B5 (176x250)
A5 (148.5x210)
Com-10
Monarch
DL
C5
Paper size to expect in the manual slot if none is
specified in your software application.
Manual Size
communicates the paper size feeding
through the MP tray. The MP tray does not have a size
sensor; therefore, you must explicitly tell the printer
what MP tray paper size to expect. The printer
compares the paper size communicated in the print
job to the
Manual Size
setting. If different, the
printer displays a message informing you what paper
size to feed through the MP tray.
The
Defaults
option (page 3-60) in the System Menu
determines whether the factory setting for
Manual
Size
is “A4 (210x297)” or “Letter (8.5x11).”
The Xerox Windows PostScript driver allows you to
select either “MP Tray” or Manual Feed” to designate
the printer’s MP tray as the paper source. If “MP Tray”
is selected from the driver, the setting of
Manual Size
on the printer Control Panel must match the paper
size requested in the driver. If
Manual Size
and the
selection of the paper size in the driver do not match,
the page may be formatted incorrectly. You can
change the setting of
Manual Size
in the PostScript
Menu after the Control Panel prompts you to load the
appropriate paper in the MP tray. The setting of
Manual Size
on the Control Panel only affects paper
fed from the MP tray. This setting is ignored for paper
fed from the standard or lower trays.
Print Errors
Off*
On
Control of PostScript’s built-in error handler
(debugger).
Should the printer encounter a PostScript error while
printing a job, PostScript prints an error sheet when
Print Errors
is
On
. This is useful on a network, as an
error sheet will alert the user that the print job had
errors and was flushed.
Figure 3.12 PostScript Menu options showing factory settings
(continued)
Option
Setting
Description
AUG-CH03 Page 34 Black,Red,Cyan Friday, February 3, 1995 12:22 AM