Filter
Top Products
Fuser Cleaning Cycle
Chapter 6: Maintaining the Printer
❖
6-9
To run the fuser cleaning cycle, follow the steps below.
Whenever you replace an EP cartridge, run the fuser cleaning
cycle. This will prevent paper jams caused by dirty fuser
components.
1
On the Control Panel, press Online
You will see:
Offline _/_
Press a key...
The fuser cleaning process uses
three
sheets of A4 or
8.5 x 11 (Letter) paper. Be sure there is paper loaded
in the standard paper source.
2
Press Menu
You will see:
Main Menu
Language >
3
Press Up or Down until you see:
Main Menu
Test Menu >
4
Press Enter
You will see:
Test Menu
Config. Sheet
Fuser
Cleaning Cycle
Note
AUG-CH06 Page 9 Black,Red,Cyan Friday, February 3, 1995 12:29 AM