Filter
Top Products
PCL Menu
3-26
❖
4505/4505ps or 4510/4510ps User’s Guide
Page Protection
Off*
A4 (210x297)
Legal (8.5x14)
Letter (8.5x11)
See
Figure 2.3 (page 2-6)
for more paper
dimensions.
Use to reserve memory for a full page of the selected
paper size.
When
Off
, memory is not reserved for an entire page.
It then becomes possible for a page to be too complex
to compose. The result is a
Page Too Complex
error message and the page may be printed on more
than one sheet of paper.
When set to a paper size, each page is composed into
reserved memory before the paper starts to move
through the printer. The printer may slow down
slightly with
Page Protection
; however, you will be
assured of printing a complex page on one sheet of
paper.
Page Protection
can be overridden by software
when the Xerox printer driver is installed.
See
“Printer Settings that Affect Memory” (page 3-67)
for further information.
Jam Recovery
Note: The default for Jam
Recovery is
On
for
firmware release 4.0. The
default is
Off
(as shown at
right) for releases > 4.0. To
determine the firmware
release of your printer,
print a Configuration
Sheet.
Off*
On
Determines how the printer recovers from a paper
jam. It is set independently for PCL and PostScript.
When
On
, the printer reprints any pages in the printer
at the time of the jam, after the jam has been cleared.
The printer does this by using a portion of memory to
store data. This setting can reduce printer speed with
minimum memory installed. Printer speed can be
increased by installing additional memory and/or
using the default setting of
Off
.
When
Off
, some pages may be lost after the jam has
been cleared. The print job must be resent, specifying
those pages that did not print as a result of the paper
jam.
See
“Printer Settings that Affect Memory” (page 3-67)
for further information.
Figure 3.10 PCL Menu options showing factory settings
(continued)
Option
Setting
Description
AUG-CH03 Page 26 Black,Red,Cyan Friday, February 3, 1995 12:22 AM