Filter
Top Products
Displayed Control Panel Messages
7-8
❖
4505/4505ps or 4510/4510ps User’s Guide
Install
EP Cartridge
The EP cartridge is missing or not installed correctly.
ACTION: Reseat existing cartridge or install a new cartridge. See
“Replacing the EP
Cartridge” (page 6-3)
. If problem continues, contact your dealer or Xerox / Rank
Xerox.
IOT NVM Fail
Service Required
Nonvolatile Memory (NVM) has failed on the print engine (also called the
IOT—Image Output Terminal). Printing cannot resume.
ACTION: Contact your dealer or Xerox / Rank Xerox.
Laser Failure
Service Required
Laser assembly has failed; printing cannot continue.
ACTION: Contact your dealer or Xerox / Rank Xerox.
Last Page
The printer was busy processing data from a host but the last page was not
completed and the last page timeout has expired.
This message appears until either:
• More data arrives.
or
•
Port Time Out
expires and
Auto Job End
is
On
.
or
• PostScript “waittimeout” expires.
ACTION: None.
Load A4
ACTION: Load A4 paper into the tray(s) indicated on the top line of the display.
Load A5
ACTION: Load A5 paper into the tray(s) indicated on the top line of the display.
Load B5
This message is for the manual bypass slot (MP tray) only.
ACTION: Load B5 (ISO) paper into the MP tray.
Load C5
ACTION: Load C5 paper into the tray(s) indicated on the top line of the display.
Load Com-10
ACTION: Load Com-10 envelopes (or paper) into the tray(s) indicated on the top
line of the display.
Load DL
ACTION: Load DL envelopes (or paper) into the tray(s) indicated on the top line of
the display.
Load Exec
ACTION: Load Executive paper into the tray(s) indicated on the top line of the
display.
Load Folio
ACTION: Load Folio paper into the tray(s) indicated on the top line of the display.
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
AUG-CH07 Page 8 Black,Cyan Friday, February 3, 1995 12:34 AM