Filter
Top Products
Displayed Control Panel Messages
7-16
❖
4505/4505ps or 4510/4510ps User’s Guide
Warning 300/B5
This message appears in PCL when the printer has changed resolution to 300 or
page protection to B5; appears in PostScript when the page size is B5 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/C10
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Com-10; appears in PostScript when the page size is Com-10
and the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/C5
This message appears in PCL when the printer has changed resolution to 300 or
page protection to C5; appears in PostScript when the page size is C5 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/DL
This message appears in PCL when the printer has changed resolution to 300 or
page protection to DL; appears in PostScript when the page size is DL and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
AUG-CH07 Page 16 Black,Cyan Friday, February 3, 1995 12:34 AM