Filter
Top Products
Dual In-Line Memory Module (DIMM)
139
4 Insert the new DIMM straight into the DIMM connector until the latches
snap into the locked position.
Observe the keyed side of the DIMM to align it with the connector. If you
cannot snap the DIMM into place, do not force it. Reposition it, making
sure that the DIMM is seated completely in the connector.
5 Reinstall the panel and tighten the screw.
" If you removed the duplex unit in step 1, reinstall it.
6 Reconnect all interface cables.
7 Reconnect the power cord, and turn on the printer.
8 Enable the memory in the driver. For instruction on enabling the memory,
see “Selecting Driver Options/Defaults (for Windows)” on page 17.