Filter
Top Products
Selecting Driver Options/Defaults (for Windows)18
9 Click Printing Preferences.
The Printing Preference dialog box appears.
10 Select the default settings for your printer, such as the default media
format you use, on the appropriate tabs.
11 Click Apply.
12 Click OK to exit from the Print preference dialog box.
13 Click OK to exit from the Properties dialog box.
Windows Me/98SE (Xerox Phaser 6120 PostScript)
1 Choose the driver’s properties as follows:
From the Start menu, choose Settings, and then Printers to display
the Printers directory. Right-click the Phaser 6120 PPD printer icon
and choose Properties.
2 Select the Device Options tab.
3 Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 6.
4 From the Installable options list, select an option, one at a time, and
then select Installed or Not Installed from the Change setting for:
menu.
5 Click Apply.
6 Select the default settings for your printer, such as the default media
format you use, on the appropriate tabs.
7 Click Apply.
8 Click OK.
Windows Me/98SE (Xerox Phaser 6120 PCL6)
1 Choose the driver’s properties as follows:
From the Start menu, choose Settings, and then Printers to display
the Printers directory. Right-click the Phaser 6120 PCL6 printer icon
and choose Properties.
2 Select the Configure tab.
3 Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 7.
4 Click the Refresh button to automatically configure installable options.
" The Refresh button is available only if bi-directional
communication is available with the printer; otherwise it is grayed
out.