Filter
Top Products
About the Control Panel
37
SUBNET
MASK
Settings
0.0.0.0
Specify the subnet mask for the
network. Use the Up, Down, Left, and
Right keys to specify the value.
ENABLE
HTTP
Settings
YES/NO
Specify whether or not HTTP is used.
If YES is selected, the Web page
provided to the printer by the built-in
HTTP server is enabled.
If NO is selected, the Web page cannot
be used.
ENABLE
AUTO IP
Settings
YES/NO
Select whether or not the IP address is
automatically acquired when DHCP/
BOOTP and PING, ARP are not
functioning or when there is no
response.
If NO is selected, the IP address is not
automatically acquired.
If YES is selected, the IP address is
automatically acquired.
IPX/SPX FRAME
TYPE
Settings
AUTO/802.2/802.3/
ETHER II/SNAP
Specify the protocol used with
NetWare.
ETHERTALK NAME
Settings
Phaser 6120
Specify the name of the printer for
finding printers with Macintosh
EtherTalk.
The printer name can contain a
maximum of 16 characters.
NAME2
Settings
Automatically
entered
Specify the name of the printer for
finding printers with Macintosh
EtherTalk.
The printer name can contain a
maximum of 16 characters.