Filter
Top Products
Submitting print jobs using Windows NT 4.0 drivers
5-18 Guide to Submitting Jobs from the Client
Setting the image shift
You can use the Image Shift option to offset the printed image
from the edges of the page. This is particularly useful for bound
or drilled jobs. The image shift setting is applied automatically to
both sides of the print for two-sided printing. When the Image
Shift option is set
at 0 (zero), the image is not shifted in any direction.
1. From the Setup window, set the unit of measure by selecting
the Preferences icon. Refer to the section “Setting the
preferences” for more information.
2. To specify a horizontal image shift, enter the number of units
to shift the image from the left edge of the page in the X text
box. A positive number shifts the image to the right, and a
negative number shifts the image to the left.
3. To specify a vertical image shift, enter the number of units to
shift the image from the top edge of the page in the Y text
box. A positive number shifts the image up, and a negative
number shifts the image down.
NOTE: An image shift set with the Image Shift option may
interfere with any binding offset set in the document file by the
application.
Specifying the paper weight
On the Paper Stocks window, enter the number of grams per
square meter (gsm) in the [Weight] box. You can enter a number
in the range 60 to 413. The default is 75 gsm.
Programming the Main Stock (Stock 1)
This area allows you to specify the paper type, size and color.
Refer to the section “Specifying paper stocks” for detail.