Filter
Top Products
Setting up workstations
2-6 Guide to Submitting Jobs from the Client
Installing the Decomposition Service DOS Tools on the PC
To install the Decomposition Service Tools, insert the diskette for
DOS workstations. Create a directory and copy the tools from
the diskette as shown:
The example shows how to copy all tools. However, you may
need to install only some of the available tools. Copy only the
needed files to your
drive.
NOTE: If you also install Windows Decomposition tools ensure
that they are not installed to the same directory as the DOS
tools.
Refer to the Decomposition Service and Tools Guide for more
information on using Decomposition Service.
Removing DOS client software
This section describes the procedure for removing the print
command client software. You may need to perform this
procedure prior to updating software, or to correct corrupted file
installation on the platform. The steps are shown below.
mkdir c:\dptools
cd c:\dptools
copy a:*.*
C:/> cd \usr\xerox\NPS/IPS\client
C:/> del cconf
C:/> cd \usr\xerox\NPS/IPS\client\bin
C:/> del listq.exe
C:/> del print.exe
C:/> del listjob.exe
C:/> cd ..\man
C:/> del listq
C:/> del listjob
C:/> del print
C:/> cd ..\gpj
C:/> del xrxgpj1.ps
C:/> del xrxgpj2.ps