Filter
Top Products
DocuPrint and DocuColor 2060 NPS/IPS client overview
Guide to Submitting Jobs from the Client 1-7
The job status command (
lpq
) is available at client
workstations unless your TCP/IP network communications
utilities do not support it.
• Xerox Client Software provides commands for listing the
status of the job (
listjob
) and for listing the queue (
listq
).
These commands are available for jobs submitted using
Xerox Client Software.
• AppleTalk provides job status information at the client
workstation through the print monitor function. Workstation
users can also determine the status of a queue.
The following table describes the job status capabilities of the
various workstations.
Table 1-2. Job status reference
Platform Job status capability
Sun Workstation • Job status is available by issuing the appropriate command at the command
line.
• Job status information is available for jobs submitted using Xerox Client
Software.
PC • Job status is available depending on the TCP/IP software installed on the
workstation. You must issue the appropriate command at the command line.
• Job status information is available for jobs submitted using Xerox Client
Software
(via DOS).
• Job status information is available using the Novell PCONSOLE utility if the
printer is configured as a remote printer or print server.
Apple Macintosh Job status information is available at the workstation through AppleTalk.
IBM RS/6000,
HP/Apollo and
DEC Alpha UNIX
Job status information is available for jobs submitted using Xerox Client Software
and by using the
lpstat
command for jobs submitted using the
lp
command.