Filter
Top Products
Submitting print jobs using Macintosh drivers
Guide to Submitting Jobs from the Client 4-3
Selecting a LaserWriter driver, version 8.x
Before you perform this procedure, ask your Network
Administrator what EtherTalk Phase and AppleTalk zone your
printer is located in, if any, and the name of your DocuPrint
printer or virtual printer queue.
1. From the Apple menu, click [Chooser].
2. Click the LaserWriter icon from the printer icons in the upper
left box of the Chooser dialog box.
3. If your network is configured to include AppleTalk print zones,
click the zone in which your DocuPrint printer is located.
NOTE: Depending on the operating system version you are
using, you may or may not see the AppleTalk zones listed on
the Chooser dialog. If the zones are not listed, skip this step.
4. Click the name of the DocuPrint printer or virtual printer you
want to use.
5. Because you use AppleTalk to print to the DocuPrint printer,
make sure the AppleTalk option is set to [Active].
6. Click [Create].