Filter
Top Products
Setting up workstations
Guide to Submitting Jobs from the Client 2-11
5. Find the client directory and command file for your client
platform in the table below.
6. Using the appropriate client directory and command file,
enter the following to access the printer controller using the
ftp guest account.
7. Change the mode and run the command file to perform the
installation. Enter the name of the printer controller to install
from, as follows:
8. Verify that line 1 of the /usr/xerox/NPS/IPS/client/cconf file
has the name of the printer controller. If it does not, edit line 1
to include the printer controller name (default).
9. In order to use the client commands (print, listq, and listjob)
verify that your path environment contains the directory /usr/
xerox/NPS/IPS/client/bin for the client commands. This
directory should precede all other directories in the path. The
installation script will also copy these three commands to /
usr/bin. In order to use the commands:
Client platform Client directory Command file
SunOS 4.1.x and 4.0 SUN4 instsun4
Sun Solaris SOLARIS instsolaris
DEC ULTRIX 4.3 (MIPS) DEC__ULT instult
HP 9000 HP-UX 10.01 HP__UX insthpux
RS 6000 IBM AIX 4.1 IBM__AIX instibmaix
MS-DOS Sun PC-NFS MS__DOS__NFS instnfs.bat
MS-DOS FTP MS__DOS__FTP instftp.bat
MS-DOS Wollongong
Pathway Access
MS__DOS__PATH
WAY
instpat.bat
# ftp <printer controller name>
Name: <printer controller name:username>:ftp
Password: <RETURN>
ftp> ls
ftp> bin
ftp> cd <client directory>
ftp> get <command file>
ftp> quit
#
#chmod +x <command file>
#<command file> <printer controller name>