Filter
Top Products
DocuPrint and DocuColor 2060 NPS/IPS client overview
Guide to Submitting Jobs from the Client 1-3
Once an attribute is assigned to a job, it cannot be removed.
However, in some cases, its value may be changed. For
example, the operator can change the calue of the plex attribute
from simplex to duplex.
For detailed information on attributes, refer to the
Guide to
Managing Print Jobs
.
Virtual printers
A virtual printer is a “logical” printer that applies sets of attributes
to jobs submitted to it.
Each virtual printer has a different name, and one physical
printer can have numerous virtual printers set up on it.
Users can override virtual printer attributes by using the
appropriate job submission option.
NOTE: If the virtual printer has the attribute SkipJTPrescan set
to “true,” then all attributees set in a a job ticket are ignored.
For detailed information on virtual printers and their
management, refer to the
Guide to Managing Print Jobs
.
Submitting print jobs
You can send print data directly from the application to the
printer, or you can create a PDL data (pc-centric) file on the
workstation, then use a print job submission program to print.
The method you choose depends on your workstation
configuration and your job submission requirements.
Regardless of the job submission method, keep in mind the
following regarding the job size:
• While the maximum number of sheets in a job is not limited, it
is strongly recommended that a large job be broken up into
smaller jobs.
• The NPS/IPS has a file size limit of 1,999,999,000 bytes.
When attempting to submit a job larger than this limit, a
message is posted to /var/log/DocuPrint stating the job could
not be queued due to its size. Break up large jobs into smaller
jobs.