Filter
Top Products
Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Guide to Submitting Jobs from the Client 3-25
• -C“(media=<mediaDef>)”
Allows you to define the following options in order:
– <Paper size>:<paper type>:<paper color>:<weight>
Paper size for models 4850/4890/92C and 2060 =
<“USLetter” | “USLegal” | “A4” | “nxn”>
Acceptable custom paper sizes (
n
x
n
specified in
millimeters) range from 8 by 10 inches / 203 by 254
mm to 8.5 by 14 inches / 216 by 356 mm.
Paper size for 96/4635/180 NPS/IPS =<“USLetter” |
“USLegal” | “USLedger” | “Tabloid” | “A3” | “A4” | “nxn”>
Acceptable custom paper sizes (nxn, specified in
millimeters) range from 7 by 10 inches / 178 by 254
mm to 14.33 by 17 inches 364 by 432 mm.
– Paper type = <transparency | drilled | arbitrary text string
excluding colon and comma>
– Paper color = <arbitrary text string excluding colon and
comma>
– Weight = gsm (grams per square meter).
You may omit a value for any of these options by entering a
colon (:) to separate the fields but leaving the field value
empty. You may also specify multiple media for your
document. The first value is the default used if no media
selection is specified for the document.
If you indicate the paper color or weight you want but the
paper tray setting on the printer controller omits these values,
the document is printed from the tray regardless of what you
specified. For example, if you define USLetter::green, but the
tray setting on the printer controller is USLetter::white, the
document is printed from the tray (regardless of the paper
color loaded) even though you specified green as the paper
color.
• -C“(<nostitch | nostaple>)” (for models 4050/4090/4850/4890/
92C only)
Specifies that the document is not stapled after it is printed.
•-C“(nto1)”
Asserts that the document is in descending order, regardless
of the number specified for the first or last page.