Filter
Top Products
Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Guide to Submitting Jobs from the Client 3-9
NOTE: The use of tumble duplex is restricted by certain
characteristics of the PostScript mask. If you have difficulty
using this option, contact your Xerox representative for
assistance.
•-plexDynamic <true>
Specifies that plex changes indicated in the job data stream
are honored.
•-preFinish <prefinish> <#> <#>
Sets the paper type to the selected preFinish value.
NOTE: The value “plain” for prefinish causes the “type”
portion of the Media to be blank.
Refer to “-pageException” for the preFinish values and their
corresponding holes and tab order.
To avoid a “media wait” condition at the printer controller,
papertray should also be set to the selected preFinish value.
• -recipient <text>
Specifies the information in the recipient field on the banner
sheet of the printed output. This string cannot exceed 40
characters. If the text string includes spaces, enclose it in
quotes (“”).
• -resolution <#>
Specifies the resolution in dots per inch (dpi). Valid
resolutions are “240,” “300,” “400,” and “600,” depending on
the specific printer.
• -senderName <text>
Replaces the userName variable on the banner page of the
printed output. This string cannot exceed 40 characters. If the
name contains spaces, enclose it in quotes (“ ”).
NOTE: If you use the
List Documents
command at the
printer controller, a maximum of 25 characters is displayed
under the Sender Name field.
• -server <printer controller name>
Sends the print request to the specified printer controller. The
default setting sends the print request to the printer controller
indicated in the /usr/xerox/nps/client/cconf file. Use the name,
not the IP address.