Filter
Top Products
Guide to Submitting Jobs from the Client xvii
Introduction
This guide describes how to print documents from the platforms
supported by this system.
The NPS/IPS printers support the processing and printing of
PDL and ASCII jobs from network workstations, as well as IPDS
jobs from an IBM host. Supported PDL formats are PostScript
levels 1 and 2, HP PCL 5e, and TIFF.
NOTE: You may be using the DocuPrint NPS/IPS software
extension on a DocuPrint 2000 EPS system. The 2000 Series
printer models are the 100, 135, 155, and 180. These printers
are comparable in capabilities to the DocuPrint NPSIPS models
96, 4635, and 180.
About this guide
This guide provides the information you need to submit
documents to the Xerox DocuPrint or DocuColor 2060 NPS/IPS
printers from your client workstation. It is a companion guide to
the following Xerox Production Print Services publications:
•
Guide to Job Submission for Windows
and
Guide to Job
Submission for Macintosh
These guides
contain the installation procedures and
instructions on how to use the
Xerox Production Print
Services (XPPS) software
to set up and print jobs.
•
Guide to Job Submission Using XDS Plus
This guide
contains the installation procedures and
instructions on how to use the Xerox Document Submission
Plus (XDS Plus) software to set up and print jobs.
You should be familiar with your workstation operations, and any
application you are using to generate print jobs.
Before using this guide, become familiar with its contents and
conventions.