Filter
Top Products
Xerox Mobile Scanner
User’s Guide
77
Cleaning Your Scanner
If you still see streaks or lines in the scanned image after calibrating the scanner, use the cleaning swab to clean the
scanner glass.
1. Dampen the tip of the cleaning swab with some Isopropyl rubbing alcohol (95%)
2. Facing the back of the scanner, press and hold the button on the side of the scanner. This button separates the
glass from the rollers for cleaning.
Note that if you release the button, the glass will be set back in place for scanning. You must press and hold the
button while cleaning.
3. Insert the tip of the cleaning swab into the back of the scanner.
4. Swipe the tip across the inside of the scanner from right-to-left. Repeat this 5 or 6 times to thoroughly clean
the scanner.
5. When you are finished cleaning the scanner, release the button on the side of the scanner. Store the cleaning
swab in a clean, dust-free area.