Filter
Top Products
Print Modes and Options
Print Modes
118
13383L-004 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 9/6/07
11. If you are using a core, slide it onto the rewind spindle until it is flush against the guide
plate.
12. Wind the media liner counterclockwise around the rewind spindle.
13. Reinstall the hook. Insert the short end of the hook into the hole in the center of the
adjusting nut (
1). Insert the long end of the hook into the small hole on the guide plate (2).
14. Rotate the spindle counterclockwise several turns to wind the media liner over the hook
and remove any slack.
Note • A core is not required.
2
1