Filter
Top Products
207
Specifications
Media Specifications
9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A
140XiIIIPlus, 170XiIIIPlus, R170Xi, and 220XiIIIPlus Printers
Media Specifications
140XiIIIPlus
170XiIIIPlus/
R170Xi
220XiIIIPlus
Minimum label length Tear-Off 0.7 in. (18 mm) 0.7 in.* (18 mm*) 0.7 in. (18 mm)
Peel-Off 0.5 in. (13 mm) 0.5 in.* (13 mm*) 0.5 in. (13 mm)
Cutter 1.5 in. (38 mm) 1.5 in.* (38 mm*) 1.5 in. (38 mm)
Rewind 0.25 in. (6 mm) 0.25 in.* (6 mm*) 0.25 in. (6 mm)
RFID labels N/A ** N/A
Total media width
(label + backing,
if any)
Minimum 1.57 in. (40 mm) 2.00 in.* (51 mm*) 4.25 in. (108 mm)
Maximum 5.51 in. (140 mm) 7.1 in.* (180 mm*) 8.80 in. (224 mm)
RFID labels N/A ** N/A
Total thickness
(includes backing, if any)
Minimum 0.003 in. (0.076 mm) 0.003 in. (0.076 mm) 0.003 in. (0.076 mm)
Maximum 0.012 in. (0.305 mm) 0.012 in. (0.305 mm) 0.012 in. (0.305 mm)
Cutter maximum full-width
media thickness
0.009 in. (0.23 mm) 0.007 in. (0.18 mm) 0.005 in. (0.14 mm)
Roll media core inside diameter 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm)
Maximum roll diameter on 3 in.
(76 mm) core
8.0 in. (203 mm) 8.0 in. (203 mm) 8.0 in. (203 mm)
Interlabel gap Minimum 0.079 in. (2 mm) 0.079 in.* (2 mm*) 0.079 in. (2 mm)
Preferred 0.118 in. (3 mm) 0.118 in.* (3 mm*) 0.118 in. (3 mm)
Maximum No more than the
calibrated length of
the label.
No more than the
calibrated length of
the label.*
No more than the
calibrated length of
the label.
RFID labels N/A ** N/A
Maximum internal fanfold media
pack size (label + backing): L×W×H
8.0×5.5×4.5 in.
(203×140×114 mm)
8.0×7.1×4.5 in.
(203×180×114 mm)
8.0×8.8×4.5 in.
(203×224×114 mm)
Ticket/tag sensing notch: L×W 0.12×0.25 in.
(3×6 mm)
0.12×0.25 in.
(3×6 mm)
0.12×0.25 in.
(3×6 mm)
Ticket/tag sensing hole diameter 0.125 in. (3 mm) 0.125 in. (3 mm) 0.125 in. (3 mm)
Effective leading edge registration
accuracy (vertical)
± 0.070 in.
(± 1.8 mm)
± 0.070 in.
(± 1.8 mm)
± 0.060 in.
(± 1.5 mm)
Effective leading edge registration
accuracy (horizontal)
± 0.070 in.
(± 1.8 mm)
± 0.070 in.
(± 1.8 mm)
± 0.060 in.
(± 1.5 mm)
* Does not apply to RFID labels.
** This parameter varies for each transponder type.