Filter
Top Products
PA/PT400 & PA/PT 403 User’s Guide 11
5. Refer to Figures 5 and 6. Thread the media into the printer until
it extends approximately 1” (25.4 mm) past the printhead.
6. Separate and hold open the media hangers.
7. Place the media roll onto the media hangers, making sure it is
tightly wound.
8. Release the media hangers so the media locks into the correct
position. Make sure the media is threaded under both media
guides.
Printhea
d
Media
Compartment
Media
Hangers
Media
Guides
3
2
4
Thread Media 1“ Past Printhea
d
Media
Roll
Unwind this direction
Media
Hangers
Media
Guides
F
IG
. 5
F
IG
. 6