Filter
Top Products
18 PA/PT400 & PA/PT 403 User’s Guide
Loading the Ribbon (PT400 and 403 only)
1. If the printhead is not already open, lift it until you feel it “lock”
into place.
WARNING: NEVER touch the thermal print elements
on the underside of the printhead. Under certain condi-
tions, they can be very hot! Also, dirt or moisture from
your hands can damage the printhead!
2. Hold the ribbon cartridge as shown in Figure 14. The place-
ment arrows should be visible and pointing toward the back of
the printer.
3. Align the lower protrusions on both sides of the ribbon car-
tridge with the channels in the left and right frames (refer to
Figure 14).
Printhead
Channel
Ribbon
Arrows
Cartridge
Lower
Protrusion
F
IGURE
14