Filter
Top Products
PA/PT400 & PA/PT 403 User’s Guide 17
9. Swing up the media access door. Thread the fanfold media
through the slot beneath the notch on the media access door
(refer to Figure 12).
10. Swing open the
media access door.
Continue to insert
the media into the
printer and under
the plastic media
core until it appears
beneath the print-
head. Make sure the
media is threaded
under both media
guides.
If you’re using direct
thermal media, con-
tinue on with step
11. However, if
you’re using thermal
transfer media, you
must also install a
ribbon cartridge. Proceed to “Loading the Ribbon ‘ in this chap-
ter.
11. Swing up the media access door, ensuring that the media ex-
tends over the tear bar (refer to Figure 13).
12. Lift to hook the
top of the media
access door over
the top cover.
13. Push in the bot-
tom of the media
access door to
close.
14. Turn on the printer
or press the Feed
button if the printer
is already on.
Slot
Fanfol
d
Media
Notch
Media
F
IGURE
12
F
IGURE
13